Is the washer maze free to print?

Yes. The washer maze is free to view and print, and the solution is included on this page.

How hard is the washer maze?

It rates expert — a 150×150 grid with a 3,922-cell solution path and 1,443 dead ends. Best for ages 10+, roughly 25–40 min to solve.

Is there really only one way through the washer maze?

Yes. Every maze on MazeDIY is generated by algorithm and checked with a path-finding pass, so there is exactly one route from start to finish.

What size should I print the washer maze at?

It prints cleanly on standard A4 or US Letter paper. Print at 100% (no "fit to page") to keep the corridors an even width.

Washer Maze

A real, solvable maze shaped like a washer — generated by algorithm, verified to have a single solution, and free to print. Start at the red flag and find your way to the checkered flag.

Save Download maze Solution

Free for personal & classroom use. For commercial use — products, KDP books, or resale — get a Commercial License.

Difficulty: Expert
Best for ages: 10+
Est. solve time: 25–40 min
Grid: 150×150
Solution path: 3,922 cells
Corridor cells: 14,074
Dead ends: 1,443
Solutions: 1 (verified)

About the Washer

A washer is a thin, flat metal ring with a hole in the middle. It slips onto a bolt before the nut goes on, sitting under the head to spread the squeeze over a wider area. That keeps the bolt from digging in and helps it hold evenly. Print this for a hardware lesson and trace the little ring and its center hole.

A washer spreads out the squeeze of a bolt so it grips more evenly.
It is a flat ring that slips onto a bolt before the nut.

Solution

How to use this maze

Start at the red flag and trace a path to the checkered flag — there is one correct route.
Print on A4 or US Letter at 100% scale; the solution image above is the answer key.
Free for classroom, homeschool, and personal printing.

← Hex nut All mazes Hook →